• |
  • Request a quote
English
English
BTA Vane Pump Co., Ltd.

BTA Vane Pump Co., Ltd.

 DENISON vane pump   Yuken Double Vane pump   Rexroth PRESSURE RELIEF VALVE  
  • Home
  • Stock Categories
    • DENISON vane pump
    • Yuken Double Vane pump
    • Rexroth PRESSURE RELIEF VALVE
    • Danfoss Shut-off valves
    • Rexroth Piston Pump
    • Rexroth THROTTLE VALVE
    • PAKER Piston Pump
    • Yuken Piston pump
    • Yuken single Vane pump
    • Rexroth check valve
    • Yuken pressure valve
    • Rexroth Solenoid directional valve
    • Rexroth Vane pump
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
    • Eaton Vickers ydraulic Pump
    • Yuken Hydraulic Pump
    • Water Pump
    • Vane Pump
    • Sauer ydraulic Pump
    • Replacement for CAT
    • Piston Pump
    • Parker Denison ydraulic Pump
    • Original Hydraulic Pump
    • Kawasaki ydraulic Pump
    • Hydraulic Motor
    • Gear Pump
    • For Rexroth
    • For Komatsu
  • Technical Articles
  • DENISON vane pump
  • Yuken Double Vane pump
  • Rexroth PRESSURE RELIEF VALVE
✖

Home

Stock Categories

Technical Articles

DENISON vane pump

Yuken Double Vane pump

Rexroth PRESSURE RELIEF VALVE

Home>Products>Piston Pump>New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly

  • New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly
  • New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly

category

Piston Pump

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly SPECIFICATIONS

  • 30.0 LB
  • Flange Mount
  • Right Hand (CW)
  • V2010-1F11S4S-11DD12
  • 1 1/2
  • Flange
  • N/A
  • N/A
BTA Vane Pump Co., Ltd.

BTA Vane Pump Co., Ltd.China

  • BTA Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly Code system

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1.3125 in
  • Buna-N
  • 2500
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2500
  • N/A
  • 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • V2010-1F11S4S-11DD12
  • 2500
  • 2500
  • 6
  • 16.5
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 0.8
  • 2.22

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly Dimensions

 

BMP/OMP/BM1 Axial Distribution Hydraulic Orbit MotorShaft End RPM [Max:30.0 LB; Minor Diameter [Min:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Cover End Flow @ RPM:V2010-1F11S4S-11DD12; Displacement Shaft End (cu in/revolution):1 1/2; Seal Material:Flange; Displacement Cover End (cu in/revolution):N/A; Port Size:N/A; Minor Diameter [Max:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
SQP1 SQP2 SQP3 SQP4 Aftermarket Tokimec Hydraulic Vane Pump Cartridge KitsMax. RPM [Max:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Minor Diameter [Max:Right Hand (CW); Cover End RPM [Max:V2010-1F11S4S-11DD12; Mounting Flange:1 1/2; Spline Description:Flange; Cover End Flow @ RPM:N/A; Shaft Dia.:N/A; Pressure Port Size, Shaft End:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
New Replacement MS18 Rotor for Poclain Hydraulic Motor PartsCover End RPM [Max:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Size:Right Hand (CW); Shaft Seal Type:V2010-1F11S4S-11DD12; Pump Series:1 1/2; Controlled Flow Rate:Flange; Shaft End Pressure [Max:N/A; Port Orientation - Cover End:N/A; Port Type:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
Hot Sale Eaton 101-1008-009/101-1008 Hydraulic Motor BMPH400Model No.:30.0 LB; Cover End RPM [Max:Flange Mount; Shaft Key:Right Hand (CW); Mounting:V2010-1F11S4S-11DD12; Pressure Port Size, Cover End:1 1/2; Port Orientation - Shaft End:Flange; Port Orientation - Cover End:N/A; Manufacturer Part No.:N/A; Shaft End RPM [Max:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
2GG1P**R High Pressure 25MPa High Speed Hydraulic Gear Pump 2GGSpline Description:30.0 LB; Max. RPM [Max:Flange Mount; Shaft Length:Right Hand (CW); GPM @ 1,800 rpm, Cover End:V2010-1F11S4S-11DD12; Shaft End Flow @ RPM:1 1/2; Major Diameter [Min:Flange; Weight:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Shaft Seal Type:0.875 in; Port Size:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
HGP333A/HGP-333A Triple Gear Pump HydraulicPort Size:30.0 LB; Relief Valve Setting:Flange Mount; Max. RPM [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:V2010-1F11S4S-11DD12; Mounting Flange:1 1/2; Pressure Port Size, Shaft End:Flange; Cover End Pressure [Max:N/A; Cover End Flow @ RPM:N/A; Weight:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 OrbitaleCover End RPM [Max:30.0 LB; Pilot Type:Flange Mount; Shaft Length:Right Hand (CW); Shaft End Pressure [Max:V2010-1F11S4S-11DD12; Displacement Shaft End (cu in/revolution):1 1/2; Major Diameter [Max:Flange; Major Diameter [Min:N/A; Relief Valve Setting:N/A; Port Orientation - Cover End:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
CBN-E306/CBN-F306 16MPa/20MPa High Efficiency Hydraulic Pumps Gear PumpShaft End RPM [Max:30.0 LB; Integral Valve Configuration:Flange Mount; Spline Description:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F11S4S-11DD12; Port Orientation - Cover End:1 1/2; Major Diameter [Min:Flange; Cover End Pressure [Max:N/A; Pilot Type:N/A; Minor Diameter [Max:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
Hydstar Sell Orbit Hydraulic Motor BMT/OMT 315 WIth Best PriceDisplacement Cover End (cu in/revolution):30.0 LB; Seal Material:Flange Mount; Controlled Flow Rate:Right Hand (CW); Minor Diameter:V2010-1F11S4S-11DD12; Port Orientation - Shaft End:1 1/2; Port Size:Flange; Shaft End Pressure [Max:N/A; Cover End Pressure [Max:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
HGP-4A Flange or Foot Mounting Hydraulic Gear Pump HGP4AGPM @ 1,800 rpm, Shaft End:30.0 LB; Relief Valve Setting:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Cover End RPM [Max:V2010-1F11S4S-11DD12; Shaft Dia.:1 1/2; Major Diameter [Max:Flange; Seal Material:N/A; Minor Diameter [Max:N/A; Shaft End Flow @ RPM:0.875 in; Port Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
Replacement SGP1/SGP2 Kyb Hydraulic Gear Pump for Shimadzu ForkliftRelief Valve Setting:30.0 LB; Major Diameter [Min:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F11S4S-11DD12; Minor Diameter:1 1/2; Shaft End Flow @ RPM:Flange; Seal Material:N/A; Manufacturer Part No.:N/A; Controlled Flow Rate:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;
BMP200 High Torque Small Orbit Hydraulic Motor For Road RollerPort Size:30.0 LB; Model No.:Flange Mount; Max. RPM [Max:Right Hand (CW); Major Diameter [Max:V2010-1F11S4S-11DD12; Shaft End Flow @ RPM:1 1/2; Shaft Seal Type:Flange; Shaft End RPM [Max:N/A; Mounting Flange:N/A; Integral Valve Configuration:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.22;

 

Piston Pump - an overview | ScienceDirect Topics

Hydraulic subsurface piston pumps are composed of two basic sections—a hydraulic engine and a piston pump. They are directly connected with a middle rod. As the ...

Piston Pumps | Parker NA

Parker offers a comprehensive selection of both fixed and variable pump ... Parker Piston Pumps offer reliable performance, precision, and compact designs.

Piston Pumps and Packages | ARO Fluid Handling

ARO piston pumps are capable of handling a range of viscous fluids. With a wide selection of pressure ratios and displacement rates available, ARO offers a ...

Piston pump - Wikipedia

A piston pump is a type of positive displacement pump where the high-pressure seal reciprocates with the piston. ... Piston pumps can be used to move liquids or ...

Piston Pumps and Plunger Pumps Selection Guide ...

Piston pumps and plunger pumps use a mechanism (typically rotational) to create a reciprocating motion along an axis, which then builds pressure in a cylinder ...Advantages: Disadvantages

How Does a Hydraulic Piston Pump Work? | Panagon ...

Jul 28, 2020 — Hydraulic piston pumps are used to power a wide range of professional equipment and industrial machinery. But there comes a time when your ...

How a Hydraulic Piston Pump Works | Western Hydrostatics

Feb 2, 2018 — A hydraulic piston pump is a type of reciprocating positive displacement pump that creates high amounts of pressure to help with the flow of ...

 

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly Video

 

Contact Us

BTA Vane Pump Co., Ltd.
Address2, rue Auguste Comte, BP 49, 92174 Vanves Cedex, France
  • BTA Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly Technical Articles

How are hydraulic motors rated?
16 Hydraulic Motor Terms You Need to Know - Shop Talk BlogFeb 16, 2017 — Fixed-displacement hydraulic motors provide constant torque with variable speed achieved by varying the flow of hydraulic fluid to the motor Matching a Hydraulic Motor to...
How do 2 stage hydraulic pumps work?
How does a 2-stage hydraulic pump work? - TractorByNetMay 20, 2003 — There are several different designs when it comes to multi-stage hydraulic pumps. The one you refer to on a wood splitter is usually a 2-stage  What Size Hydraulic Pump...
How do you troubleshoot a hydraulic pump?
Hydraulic System Troubleshooting Tips | Cross MfgFinding and Solving Problems · Oil viscosity too high, cold oil. Allow oil to warm up before operating machine. · Low pump drive speed. Increase engine speed (  Hydraulic...

Piston Pump CATEGORIES

  • DENISON vane pump
  • Yuken Double Vane pump
  • Rexroth PRESSURE RELIEF VALVE
  • Danfoss Shut-off valves
  • Rexroth Piston Pump
  • Rexroth THROTTLE VALVE
  • PAKER Piston Pump
  • Yuken Piston pump
  • Yuken single Vane pump
  • Rexroth check valve
  • Yuken pressure valve
  • Rexroth Solenoid directional valve
  • Rexroth Vane pump
  • BOSCH injector
  • CUMMINS injector
  • DEUTZ injector
  • COMMON RAIL injector
  • Eaton Vickers ydraulic Pump
  • Yuken Hydraulic Pump
  • Water Pump
  • Vane Pump
  • Sauer ydraulic Pump
  • Replacement for CAT
  • Piston Pump
  • Parker Denison ydraulic Pump
  • Original Hydraulic Pump
  • Kawasaki ydraulic Pump
  • Hydraulic Motor
  • Gear Pump
  • For Rexroth
  • For Komatsu
MORE

Customers Who Viewed New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly Also Viewed

  • Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale
  • New Replacement MS18 Rotor for Poclain Hydraulic Motor Parts
  • Hydstar Sell Orbit Hydraulic Motor BMT/OMT 315 WIth Best Price
  • Hot Sale Eaton 101-1008-009/101-1008 Hydraulic Motor BMPH400
  • BMP200 High Torque Small Orbit Hydraulic Motor For Road Roller
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BTA Vane Pump Co., Ltd.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • DENISON vane pump
    • Yuken Double Vane pump
    • Rexroth PRESSURE RELIEF VALVE
    • Danfoss Shut-off valves
    • Rexroth Piston Pump
    • Rexroth THROTTLE VALVE
    • PAKER Piston Pump
    • Yuken Piston pump
    • Yuken single Vane pump
    • Rexroth check valve
    • Yuken pressure valve
    • Rexroth Solenoid directional valve
    • Rexroth Vane pump
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
    • Eaton Vickers ydraulic Pump
    • Yuken Hydraulic Pump
    • Water Pump
    • Vane Pump
    • Sauer ydraulic Pump
    • Replacement for CAT
    • Piston Pump
    • Parker Denison ydraulic Pump
    • Original Hydraulic Pump
    • Kawasaki ydraulic Pump
    • Hydraulic Motor
    • Gear Pump
    • For Rexroth
    • For Komatsu
  • Technical Articles
  • DENISON vane pump
  • Yuken Double Vane pump
  • Rexroth PRESSURE RELIEF VALVE
✖

Home

Stock Categories

Technical Articles

DENISON vane pump

Yuken Double Vane pump

Rexroth PRESSURE RELIEF VALVE

Contact Us